Buttons
Before removing the buttons, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 29
).
5.
Disconnect the battery (see
Battery on page 31
).
6.
Remove the hard drive (see
Hard drive on page 54
).
7.
Remove the keyboard (see
Keyboard on page 45
).
8.
Remove the fans (see
Fans on page 51
).
9.
Remove the smart card reader (see
Smart card reader on page 53
).
10.
Remove the system board (see
System board on page 63
).
Remove the buttons:
1.
Remove the Phillips PM2.5×2.5 screw (1) that secures each button to the base enclosure.
2.
Remove the buttons from the computer (2).
3.
Remove the buttons
Reverse this procedure to install the buttons.
66
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание zbook 15 G3
