Connecting the cables
NOTE:
The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1.
Place the monitor in a convenient, well-ventilated location near the computer.
2.
Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3.
Connect a video cable.
NOTE:
The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Next Input button on the front panel or through the On-Screen Display
(OSD) by pressing the Menu button and selecting Input Control.
●
Connect a DVI-D cable to the DVI-D connector on the rear of the monitor and the other end to the
DVI-D connector on the source device.
8
Chapter 3 Setting up the monitor
Содержание Z Series
Страница 1: ...User Guide ...
Страница 4: ...iv About This Guide ...