Installing the stand
CAUTION:
Do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity of
color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.
TIP:
Consider the placement of the display, because the bezel might cause interfering reflections from
surrounding light and bright surfaces.
The display uses the HP Quick Release 2 for easy mounting of the monitor. To mount the panel onto the
stand:
1.
Lay the monitor panel face down on a flat surface covered by a clean, dry cloth.
2.
Slide the top of the mounting plate (1) on the stand under the upper lip of the recess in the back of the
panel.
3.
Lower the bottom of the stand's mounting plate (2) into the recess until it snaps into place.
4.
The HP Quick Release 2 latch (3) pops up when the stand is locked in place.
6
Chapter 3 Setting up the monitor
Содержание Z Series
Страница 1: ...User Guide ...
Страница 4: ...iv About This Guide ...
