HP xp7000 Скачать руководство пользователя

Страница: 40 / 72

Maintaining the Projector

Replacing the lamp module

As the projector operates over time, the brightness of the projector lamp gradually decreases

and the lamp becomes more susceptible to breakage. You can install a new lamp at any time

to bring the projector up to factory-fresh brightness. We recommend replacing the lamp if a

warning message is displayed.

WARNING!

Replacing the lamp module requires special consideration:

•

To reduce the risk of injury, be careful when removing the lamp module as broken glass

might be present. HP also recommends wearing goggles and gloves when removing the

lamp module. If the lamp is broken, contact HP about repairs that might be required due to

glass fragments.

•

The lamp in this digital projector contains mercury. If the lamp breaks, adequately ventilate

the immediate area, discard any nearby food and drink, and thoroughly clean the table

surface around the projector. Wash your hands after cleaning the area or handling a

broken lamp. Note that disposal of this lamp may be regulated under applicable

environmental laws due to presence of mercury. For disposal or recycling information,

please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

For additional safety information about the lamp in this digital projector, please see:

www.hp.com/hpinfo/globalcitizenship/environment/productdata

•

Because the lamp assembly operates at a very high temperature, wait 30 minutes before

removing the lamp module.

Turn off the projector and allow it to cool for 30 minutes.

If the projector is installed in a ceiling mount, remove it from the mount.

Unplug the power cord.

Содержание xp7000









































































Результаты поиска

Содержание xp7000

Отзывы:

Похожие инструкции для xp7000

Бренды по названию

Популярные бренды

HP xp7000, Руководство пользователя

Результаты поиска

Содержание xp7000

Отзывы:

Похожие инструкции для xp7000

Бренды по названию

Популярные бренды