266
Step Command
Remarks
8.
Specify an IPv6 ACL to filter
routes advertised to or
received from the 6PE peer or
peer group.
peer
{
group-name
|
ip-address
}
filter-policy
acl6-number
{
export
|
import
}
By default, no ACL is specified.
9.
Specify an IPv6 prefix list to
filter routes advertised to or
received from the 6PE peer or
peer group.
peer
{
group-name
|
ip-address
}
prefix-list
ipv6-prefix-name
{
export
|
import
}
By default, no IPv6 prefix list is
specified.
10.
Specify a routing policy to
filter routes advertised to or
received from the 6PE peer or
peer group.
peer
{
group-name
|
ip-address
}
route-policy
route-policy-name
{
export
|
import
}
By default, no routing policy is
specified.
11.
Advertise a default route to
the 6PE peer or peer group.
peer
{
group-name
|
ip-address
}
default-route-advertise
[
route-policy
route-policy-name
]
By default, no default route is
advertised.
12.
Save all routes from the 6PE
peer or peer group.
peer
{
group-name
|
ip-address
}
keep-all-routes
By default, routes from a peer or
peer group are not saved.
13.
Configure BGP updates sent
to the 6PE peer or peer group
to carry only the public AS
number.
peer
{
group-name
|
ip-address
}
public-as-only
By default, this feature is not
configured.
14.
Specify the maximum number
of routes that BGP can receive
from the 6PE peer or peer
group.
peer
{
group-name
|
ip-address
}
route-limit
prefix-number
[ {
alert-only
discard
|
reconnect
reconnect-time
} |
percentage-value
] *
By default, the number of routes
that a router can receive from
the 6PE peer or peer group is
not limited.
15.
Specify a preferred value for
routes received from the 6PE
peer or peer group.
peer
{
group-name
|
ip-address
}
preferred-value
value
By default, the preferred value
is 0.
16.
Configure the device as a
route reflector and the 6PE
peer or peer group as a client.
peer
{
group-name
|
ip-address
}
reflect-client
By default, no route reflector or
client is configured.
17.
Configure the SoO attribute
for a peer or peer group.
peer
{
group-name
|
ip-address
}
soo
site-of-origin
By default, no SoO attribute is
configured for a peer or peer
group.
18.
Return to user view.
return
N/A
19.
Display information about the
6PE peer or peer group.
display bgp peer ipv6
[
unicast
]
[
group-name
group-name
log-info
|
ip-address
{
log-info
|
verbose
} |
verbose
]
Available in any view.
20.
Display routing information
advertised to or received from
the 6PE peer or peer group.
display bgp routing-table ipv6
[
unicast
]
peer
ip-address
{
advertised-routes
|
received-routes
}
[
network-address prefix-length
|
statistics
]
Available in any view.
21.
Perform soft reset on the
inbound or outbound BGP
6PE connection.
refresh bgp
ip-address
{
export
|
import
}
ipv6
[
unicast
]
Available in user view.
22.
Reset a BGP 6PE connection.
reset bgp
ip-address
ipv6
[
unicast
]
Available in user view.
