12
Task Command
Display static route information.
display ip routing-table
protocol
static
[
inactive
|
verbose
]
Display static route next hop
information.
display route-static nib
[
nib-id
] [
verbose
]
Display static routing table
information.
display route-static routing-table
[
vpn-instance
vpn-instance-name
]
[
ip-address
{
mask-length
|
mask
} ]
Static route configuration examples
Basic static route configuration example
Network requirements
As shown in
Figure 2
, configure static routes on the routers for interconnections between any two hosts.
Figure 2
Network diagram
Configuration procedure
1.
Configure IP addresses for interfaces. (Details not shown.)
2.
Configure static routes:
# Configure a default route on Router A.
<RouterA> system-view
[RouterA] ip route-static 0.0.0.0 0.0.0.0 1.1.4.2
# Configure two static routes on Router B.
<RouterB> system-view
[RouterB] ip route-static 1.1.2.0 255.255.255.0 1.1.4.1
[RouterB] ip route-static 1.1.3.0 255.255.255.0 1.1.5.6
# Configure a default route on Router C.
<RouterC> system-view
[RouterC] ip route-static 0.0.0.0 0.0.0.0 1.1.5.5
3.
Configure the default gateways of Host A, Host B, and Host C as 1.1.2.3, 1.1.6.1, and 1.1.3.1.
(Details not shown.)
