245
Step Command
Remarks
2.
Enter BGP view or BGP-VPN
instance view.
•
Enter BGP view:
bgp
as-number
•
Enter BGP-VPN instance view:
a.
bgp
as-number
b.
ip vpn-instance
vpn-instance-name
Use either method.
3.
Enable MD5 authentication
for a BGP peer group or peer.
peer
{
group-name
|
ipv6-address
}
password
{
cipher
|
simple
}
password
By default, MD5 authentication is
disabled.
Configuring BGP load balancing
Perform this task to specify the maximum number of BGP ECMP routes for load balancing.
To specify the maximum number of BGP ECMP routes for load balancing (IPv4 unicast/multicast address
family):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or
BGP IPv4 multicast address
family view.
•
Enter BGP IPv4 unicast address family
view:
a.
bgp
as-number
b.
address-family ipv4
[
unicast
]
•
Enter BGP-VPN IPv4 unicast address
family view:
a.
bgp
as-number
b.
ip vpn-instance
vpn-instance-name
c.
address-family ipv4
[
unicast
]
•
Enter BGP IPv4 multicast address
family view:
a.
bgp
as-number
b.
address-family ipv4 multicast
N/A
3.
Specify the maximum
number of BGP ECMP
routes for load balancing.
balance
number
By default, load balancing is
disabled.
To specify the maximum number of BGP ECMP routes for load balancing (IPv6 unicast/multicast address
family):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
