HP Vectra XU 5/XX, Дополнительное руководство

Страница: 42 / 48

Vectra XU Familiarization Guide Troubleshooting and Repair
••
42
Using SETUP to Configure the PC
For more information on using the SETUP program, refer to chapter 2 of the manual Setting
Up Your PC supplied with the PC.
SETUP Options
Field name Purpose Options Remarks
Date
Time Sets date and time YY/MM/DD
HH:MM:SS
USER PREFERENCES
User Password
Keyboard Lock
Timer
Screen Blanking
Key Click Volume
Key Autorepeat
Speed
Delay Before
Autorepeat
Power-on NumLock
State
Prevents unauthorized
access to your PC
Locks the keyboard after a
specified time of non use
Blanks the screen when
the PC is locked with the
Keyboard Lock Button or
Keyboard Lock Timer
Sets the volume of the click
when keys are pressed
Sets the speed at which a
key's function repeats
Sets the delay before a key
automatically repeats its
function
Sets whether the NumLock
key is enabled when the
PC is powered on
Set/Not Set
Disabled/1 to 75
minutes
Enabled/Disabled
0 to 10
2 to 30 per second
0.25 to 1 per second
On/Off
To set your password
press
[ENTER] , type your
password and press
[ENTER] , type your
password and press
[ENTER] again and the
screen will show that the
password is set
To stop using Keyboard
Lock Timer, select
Disabled
Processor Shows the type of
processor in the PC Auto detect
Computer Speed Shows the operating
frequency of the processor Auto detect
Coprocessor Shows the type of
coprocessor in the PC Auto detect; on theVectra
XU the coprocessor is
integrated
MEMORY SIZE
Base, on System
Board
Base, on Accessory
Board
Base, TOTAL
Reserved
Memory Hole Above
1 MB
Extended
TOTAL
Confirms that SETUP has
detected and configured
the memory size fields 512 KB / 620 KB
Disabled 1 to 15 MB
Make sure the value in
the TOTAL field is correct
Memory Hole Below
1 MB Tells SETUP the size and
location of an ISA
accessory board's memory
mapped below 1MB Disabled/Board's
base address and
memory used To be used if installed
ISA board has memory
mapped below 1MB, refer
to accessory boards
manual