HP Vectra XM 5/xx Series 4, Руководство пользователя

Страница: 64 / 122

3 How to Install Accessories Inside Your PC
Installing Mass Storage Devices
52 English
Completing the Installation of an IDE Drive
After installing an IDE drive you will need to run the SETUP program
to confirm that the drive has been detected by the PC.
When an Additional IDE
Drive is Installed
1 Switch on the PC.
2 When
<Setup=F2>
appears, press to run the SETUP program.
3 In the
Hard Disk Drives
section, check that the details for
Drive 2
have been correctly detected by the SETUP program.
4 Press to save and exit SETUP.
Refer to the operating system documentation for information on
formatting a drive and installing the operating system.
When the Bootable IDE
Drive is Replaced
1 Switch on the PC.
2 An error message will appear during the Power-On-Self-Test. When
prompted, press
to run the SETUP program.
3 In the
Hard Disk Drives
section, check that the details for
Drive 1
have been correctly detected by the SETUP program.
4 Press to save and exit SETUP.
Refer to the operating system documentation for information on
formatting a drive and installing the operating system.
NOTE If an IDE drive is removed, an error message will appear during the
Power-On-Self-Test. You must run the SETUP program and select
None or SCSI
for the missing drive to correct the error.
blckfoot.bk : chapter3.fb4 Page 52 Monday, July 21, 1997 3:38 PM