Solving Problems 49 of 74
HP Web Services
Your Vectra
Setting Up
Using
Warranty and
Support Service
Installing
Components
Solving
Problems
No Sound When Running Applications
1 of 1
Have you checked that...
How
The volume, mute, and balance settings
are correct
!
•
Right-click on the speaker icon on the taskbar, then select Open
Volume Control and adjust the settings if required
•
Refer to the operating system documentation for more
information
Advanced Troubleshooting
Have you checked that...
How
The problem is not caused by a hardware
conflict. Hardware conflicts occur when
two or more peripheral devices compete
for the same signal lines or channels.
Conflicts between your audio interface
and a peripheral device might be due to
the settings of the I/O addresses, IRQ or
DMA channel.
!
Check the settings of the audio interface and other accessories in
your system.
