HP TouchSmart 600-1000 - Desktop PC, Руководство по началу работы

Страница: 86 / 136

14
User Guide (Features may vary by model)
Synchronizing the wireless keyboard or mouse
The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your
HP TouchSmart PC. The keyboard and mouse should work immediately after you first pull the battery tabs
to activate the preinstalled batteries, and then turn on the mouse (
B ).
You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.
To synchronize them:
„ Make sure the keyboard and mouse are next to the HP TouchSmart PC, within 30 cm (1 foot) and
away from interference from other devices.
„ Keyboard: Press the Connect button on the bottom of the keyboard ( A ) for five seconds. The blue
activity LED from the wireless receiver illuminates when the synchronization command has been
received and turns off when synchronization is complete.
„ Mouse: Press the Connect button on the bottom of the mouse ( C ) for five seconds. The blue activity
LED from the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
If this does not work, remove and then re-insert the wireless keyboard and mouse receiver from the back of
the computer and then synchronize the keyboard and mouse again.
Ambient Light
Select models only
The HP TouchSmart Ambient Light casts a cool white glow from the base of the computer (in select models
you can change its color). By default, the Ambient Light is turned off when you turn on the computer.
To control the Ambient Light:
„ Press the Ambient Light button on the left side of the computer to turn the Ambient Light on.
„
Continue pressing the button to cycle through low intensity, medium intensity, high intensity, off,
and on.
To change the color or intensity of Ambient Light (select models only):
1 Tap the Start button, tap All Programs , navigate to HP applications , and find the Light feature.
2 Tap the color you want.
3 Change the intensity of light either by tapping toward the top or toward the bottom of the color
spectrum, or by pressing the Ambient Light button on the computer.
A
B C
NOTE: The Ambient Light will dim when the computer goes into Sleep mode.