manualshive.com logo in svg

HP Synergy 480 Gen9, Руководство пользователя, Страница: 9 / 66

Поделиться
Скачать
HP Synergy 480 Gen9 Скачать руководство пользователя страница 9

Item LED

Status

Definition

 

 

Flashing green

The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is erasing.

 

 

Flashing amber/
green

The drive is a member of one or more logical drives and predicts the
drive will fail.

 

 

Flashing amber The drive is not configured and predicts the drive will fail.

 

 

Solid amber

The drive has failed.

 

 

Off

The drive is not configured by a RAID controller.

SFF flash adapter components and LED definitions

Item

Component

Description

1

Locate

• Off—Normal
• Solid blue—The drive is being identified by a host application.
• Flashing blue—The drive firmware is being updated or requires

an update.

2

uFF drive ejection latch

Removes the uFF drive when released

3

Do not remove LED

• Off—OK to remove the drive. Removing the drive does not

cause a logical drive to fail.

• Solid white—Do not remove the drive. Removing the drive

causes one or more of the logical drives to fail.

Table Continued

SFF flash adapter components and LED definitions

9

Содержание Synergy 480 Gen9



































































Отзывы:

Нет отзывов