manualshive.com logo in svg

HP Synergy 480 Gen9, Руководство пользователя, Страница: 26 / 66

Поделиться
Скачать
HP Synergy 480 Gen9 Скачать руководство пользователя страница 26

Hardware options installation

This chapter provides detailed instructions on how to install hardware options. For more information on
supported options, see the product QuickSpecs on the Hewlett Packard Enterprise website (

http://

www.hpe.com/info/qs

).

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.

CAUTION:

To prevent damage to electrical components, properly ground the compute module before beginning
any installation procedure. Improper grounding can cause electrostatic discharge.

Installing the drive option

The compute module supports up to two SFF SAS, NVMe, solid state, or SATA (supported only with the HPE
Synergy 480 Gen9 compute module backplane) drives.

CAUTION:

To prevent improper cooling and thermal damage, do not operate the compute module or the enclosure
unless all drive and device bays are populated with either a component or a blank.

To install the component:

Procedure

1.

Remove the drive blank.

2.

Prepare the drive:

• SAS, SATA, or solid state

• NVMe—Press 

Do Not Remove

 to open the release handle.

26

 Hardware options installation

Содержание Synergy 480 Gen9



































































Отзывы:

Нет отзывов