HP Synergy 480 Gen9 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 66

HP Synergy 480 Gen9 Скачать руководство пользователя страница 23

Setup

Installation overview

This section provides instructions for installing an HPE Synergy 480 Gen9 Compute Module in a frame for the
first time.

Installation of a compute module requires the following steps:

Procedure

1.

Installing supported options in the compute module.

2.

Installing the compute module.

3.

Completing the compute module configuration.

Installing the compute module options

Before installing and initializing the compute module, install any compute module options, such as an
additional processor, drive, or a mezzanine card.

Mezzanine options are classified as Type C and Type D mezzanine cards. The type of mezzanine card
determines where the card can be installed in the compute module. Some mezzanine cards require that an
interconnect module is installed in the associated ICM bay in the rear of the frame. Be sure to review the
mezzanine card mapping information in the

HPE Synergy Configuration and Compatibility Guide

on the

Hewlett Packard Enterprise website (

http://www.hpe.com/info/synergy-docs

).

For a list of supported options, see the product QuickSpecs on the Hewlett Packard Enterprise website
(

http://www.hpe.com/info/qs

).

For compute module options installation information, see "

Hardware options installation

Installing the compute module

Procedure

1.

Verify that the device bay is configured for a half-height compute module. For more information, see the
setup and installation guide for the frame on the

Hewlett Packard Enterprise website

.

2.

Remove the compute module end cap.

Setup

23

«
...
21
22
23
24
25
...
»

Содержание Synergy 480 Gen9



































































Отзывы:

Нет отзывов