HP SureStore Optical 2600fx Скачать руководство пользователя

Страница: 361 / 378

Micro/Macro-Moves

HP Surestore Optical Micro-Move IDs

Appendix D

D-16

Retract picker plunge assembly a short distance to relieve
the pressure after micro-move E5.

The following move IDs are only for 330fx, 600fx, 660ex,
1200ex, 1200mx and 2200mx model jukeboxes.

Mailslot finished move in.

Mailslot finished move out.

Mailslot pulled cartridge flush with front panel to check
media present/media inserted correctly.

Mailslot starting a move in.

Mailslot starting a move out.

Mailslot in the middle of a move in or move out.

Mailslot approaching the end of a move in or move out.

Mailslot unexpected stop.

Mailslot start initialization after an error or at startup.

Mailslot initialization successful.

Mailslot end move with error; move not complete.

The following move IDs are for all model jukeboxes.

On powerup, testing for motion in one direction on the
plunge motor.

On powerup, testing for motion in the plunge motor.
Opposite direction than in micro-move E7.

Plunge out to clear the picker vertical path. Used when
path is blocked during powerup.

Picker plunge assembly retraction to clear the picker
vertical path. Used when path is blocked during powerup.

Table D-1

HP Surestore Optical Micro-Move ID Table
(For all models, EXCEPT 40fx, 80ex, 125ex and 220mx)

Move ID

(hex.)

Description

Содержание SureStore Optical 2600fx


























































































































































































































































































































































































Результаты поиска

Содержание SureStore Optical 2600fx

Отзывы:

Похожие инструкции для SureStore Optical 2600fx

Бренды по названию

Популярные бренды

HP SureStore Optical 2600fx, Справочник по командам

Результаты поиска

Содержание SureStore Optical 2600fx

Отзывы:

Похожие инструкции для SureStore Optical 2600fx

Бренды по названию

Популярные бренды