HP Surestore FC10 - Disk Array, Руководство по обслуживанию

Страница: 100 / 164

100
,VRODWLQJ&DXVHV
Disk fault
LED is on Critical Fault
LED on Critical (See STM
Disk Tool)
Disk hardware is faulty. Replace the
disk.
Power supply
LED is amber Critical Amber Critical Critical – An incompatible or defective
component caused a temporary
fault.
– Power supply hardware is faulty.
Unplug the power cord and wait for the
LED to turn off. Reinsert the power
cord. If fault persists, replace the power
supply.
Fan LED is
amber Critical Amber Critical Critical Fan has slowed or stopped. Replace
the fan.
LCC fault
LED is on Critical LCC
Fault
LED on Critical Critical LCC hardware is faulty. Replace the
LCC.
LCC fault
LED is on
and the disk
system beeps none LCC
Fault on none none The Enclosure ID on the installed LCC
does not match the Enclosure ID on the
peer LCC. Reset the Enclosure ID and
reinsert the LCC.
GBIC fault
LED is on Critical Tx Fail
LED on none none – GBIC transmission circuit has failed.
– GBIC is not receiving power.
Reseat the GBIC. If problem persists,
replace GBIC. If the replacement GBIC
fails, contact HP technical support.
7DEOH 7URXEOHVKRRWLQJ7DEOHFRQWªG
Problem
Description HWEvent
Category LED
State
Status
Probable Cause/Solution SAM STM