HP StoreOnce 3100 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 73

HP StoreOnce 3100 Скачать руководство пользователя страница 6

1 Preparing for Basic Configuration

This guide assumes that the user has followed the instructions on the printed Start Here poster
to install the StoreOnce System in the Data Center and establish an initial 1 GbE network
connection for the StoreOnce Management Console.

IMPORTANT:

All tasks described in this guide require an admin user logon.

Structure of the guide

The guide is divided into two sections. The first section is task based and describes how to log
in to the StoreOnce GUI to complete basic configuration tasks. The second section provides
reference information for the hardware and physical connection to Ethernet or Fibre Channel.

Overview of configuration tasks

Table 1 Configuration checklist

Refer to

Task

Hardware overview (page 53)

The Start Here poster describes a basic installation with
connection to LAN port 1, which is valid for all products.

1

Make sure you understand what has been factory installed
and configured on your system and any further cabling
requirements. Available options for network and Fibre
Channel connectivity will depend upon the type of model.

Other sources of information (page 8)

Make sure all reference material is to hand.

2

SAS cabling for StoreOnce 5500 Systems (page 10)

StoreOnce 5500 only: Review SAS cabling requirements.

3

Powering up and setting up iLO (page 16)

Boot up the system and, if you are using a Network
Management application, such as Insight Remote Support,

4

configure iLO. (You can also configure iLO after
configuring the StoreOnce System.)

Logging in to the HPE StoreOnce System (page 21)

Log on to the StoreOnce Management Console and check
system, storage and optional hardware status.

5

Configuring licenses (page 23)

Configure licenses.

6

Setting time zone and configuring NTP (page 27)

Configure time zone and NTP server.

7

Creating user accounts and changing
passwords (page 29)

Configure users.

8

Setting up email alerts (page 31)

Configure email.

9

Setting up SNMP traps (page 33)

Configure SNMP.

10

Generating the SSL certificate (page 37)

Apply the SSL certificate.

11

Expanding storage (page 38)

If necessary, expand storage.

12

Checking software version (page 40)

Check software version.

13

Configuring Remote Support via STaTS (page 42)

Configure Remote Support via STaTS.

14

Completing network configuration (page 44)

Configure the network.

15

Configuring Fibre Channel (page 67)

Configure Fibre Channel.

16

Additional configuration tasks (page 50)

Complete configuration.

17

Running a system confidence check (page 51)

Use the StoreOnce CLI to run a confidencecheck report
on the system.

18

6

Preparing for Basic Configuration

«
...
4
5
6
7
8
...
»

Содержание StoreOnce 3100










































































Отзывы:

Нет отзывов