HP StorageWorks A7298A, Руководство по установке

Страница: 52 / 92

Troubleshooting
52 Host Bus Adapter for Windows and Linux Installation Guide
Windows Miniport Event Log Codes
The Windows Miniport driver logs events and errors in the Windows Event log.
Serious errors are always logged. Informational events are only logged if the
registry parameter LogError=1 is used.
All Miniport logged events are issued with an Event ID of 11 (INTERNAL
ADAPTER ERROR) but do not necessarily indicate an HBA error occurred. Byte
offset 0x10 of the event is the driver event code. Byte offsets 0x11 to 0x13 contain
event-specific information.
Table 5 describes the SCSI port error log codes
Table 5: SCSI Port Error Log Codes
0x10
Offset Explanation
0x11 to 0x13 Further
Information
0xC0 Invalid Link Speed Selection
(Windows NT)
0xD0 SNS_REQ (XMIT_SEQ failed) 0x11 = cmdstat, 12 = parm err
0xD1 SNS_RSP (RCV_SEQ failed) 0x11 = cmdstat, 12 = parm err
0xD3 RCV_ELS_REQ failed 0x11 = cmdstat, 12 = parm err
0xD4 XMT_ELS_REQ failed 0x11 = cmdstat, 12 = parm err
0xD5 Too many targets found (160+) 0x11 to 13 = D_DID that didn’t fit
0xD6 SNS request time-out 0x11 to 13 no additional
information
0xD7 Mailbox interrupt time-out 0x11 = mailbox word 0
0xD8 TPRLO requested when busy 0x11 = local req. state, 12 =
discstate, 13 = mailbox word 0
0xD9 Link down time-out occurred 0x11 = local req. state, 12 =
discstate, 13 = mailbox word 0
0xDA Hard link down time-out
occurred
0x11 = local req. state, 12 =
discstate, 13 = mailbox word 0
0xE0 Node purged from configuration
(Windows NT) 0x11 to 0x13 = D_ID of node
purged
0xE1 Error interrupt occurred Status register bytes 1-3 in event
11-13. E1 error indicates an HBA
hardware failure, return HBA for
repair.