HP StorageWorks A7298A, Руководство по установке

Страница: 39 / 92

Installing the SCSI Miniport Driver
39 Host Bus Adapter for Windows and Linux Installation Guide
Loading the Driver
There are two ways to load the driver: manually or through the RAM disk image.
Loading the Driver Manually
1. Enter the following commands:
# insmod lpfcdd
# insmod lpfndd
lpfcdd - main driver, SCSI functionality, FCP support, diagnostic support
lpfndd - IP support (this driver is dependent on lpfcdd being loaded first)
2. Enter the following command to bring up the interface:
Edit /etc/sysconfig/network-scripts/ifcfg-lpfnX.
3. On SuSE, run the ifconfig command (all on one line) to configure the
interface:
insmod lpfndd
ifconfig lpfn X inet 172.16.0.1 netmask 255.255.255.0
broadcast 199.199.255.255
Where X is the interface number, 0 through 7. This file should be created if
you wish to configure IP. An example of this file:
DEVICE=lpfn0IPADDR=138.239.40.6
BROADCAST=138.239.40.255
NETWORK=138.239.40.0
NETMASK=255.255.255.0
ONBOOT=yes
4. Enter the following command to manually bring up the IP interface:
ifup lpfnX
Where X is the interface number, 0 through 7.
5. Enter the following commands if the system does not have a SCSI driver
loaded:
# insmod scsi_mod
# insmod sd_mod
Rebooting the system will unload the driver. You should include the above
commands in a start up script to automatically load the driver.