HP StorageWorks 4400 Скачать руководство пользователя | Manualshive

Страница: 69 / 86

background image

hba0-port-down-retry-delay=2;

The

hba0-port-down-retry-delay

parameter is

not

supported with the 4.13.01 driver; the

time between retries is fixed at approximately 2 seconds.

•

In a fabric topology, you use persistent bindings to bind a SCSI target ID to the world wide port
name (WWPN) of an array port. This ensures that the SCSI target IDs remain the same when the
system reboots. You set persistent bindings by editing the configuration file or by using the

SANsurfer

utility.

The following example for an EVA4000/6000 illustrates the binding of targets 20 and 21 (hba
instance 0) to WWPNs 50001fe100270938 and 50001fe100270939, and the binding of targets
30 and 31 (hba instance 1) to WWPNs 50001fe10027093a and 50001fe10027093b:

hba0-SCSI-target-id-20-fibre-channel-port-name="50001fe100270938";

hba0-SCSI-target-id-21-fibre-channel-port-name="50001fe100270939";

hba1-SCSI-target-id-30-fibre-channel-port-name="50001fe10027093a";

hba1-SCSI-target-id-31-fibre-channel-port-name="50001fe10027093b";

NOTE:

Replace the WWPNs in the example with the WWPNs of your array ports. For an EVA8000, you
can add up to eight targets.

•

If the qla2300 driver is version 4.13.01 or earlier, for each LUN that users will access add an
entry to the

/kernel/drv/sd.conf

file:

name="sd" class="scsi" target=20 lun=1;

name="sd" class="scsi" target=21 lun=1;

name="sd" class="scsi" target=30 lun=1;

name="sd" class="scsi" target=31 lun=1;

If LUNs are preconfigured in the

/kernel/drv/sd.conf

file, after changing the configuration

file. use the

devfsadm

command to perform LUN rediscovery.

•

If the qla2300 driver is version 4.15 or later, verify that the following or a similar entry is present
in the

/kernel/drv/sd.conf

file:

name="sd" parent="qla2300" target=2048;

To perform LUN rediscovery after configuring LUNs, use the following command:

/opt/QLogic_Corporation/drvutil/qla2300/qlreconfig –d qla2300 -s

•

Reboot the server to implement the changes to the configuration files.

NOTE:

The qla2300 driver is

not supported for Sun StorEdge Traffic Manager/Sun Storage Multipathing.

To configure a QLogic FCA using the Sun SAN driver stack, see
“

Configuring the FCAs with the Sun SAN driver stack

” on page 66.

Fabric setup and zoning

To set up the fabric and zoning:

1.

Verify that the Fibre Channel cable is connected and firmly inserted at the array ports, host ports,
and SAN switch.

HP StorageWorks 4400 Enterprise Virtual Array installation guide

69

«
...
67
68
69
70
71
...
»

Содержание StorageWorks 4400























































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks 4400

Passport 500 Pro

Бренд: Fender Страницы: 4

Бренд: Feniex Страницы: 6

Бренд: Harman Kardon Страницы: 2

MaestroKitchen 100

Бренд: Harman Kardon Страницы: 36

Бренд: Harman Kardon Страницы: 34

Бренд: Harman Kardon Страницы: 2

Бренд: jablotron Страницы: 30

Бренд: Nakamichi Страницы: 2

Бренд: Velleman Страницы: 3

Бренд: Aiphone Страницы: 32

Бренд: Bose Sicilia Страницы: 24

Бренд: R-Tech Страницы: 20

Бренд: Active Audio Страницы: 46

Бренд: Lightspeed Страницы: 31

Бренд: Phoenix Gold Страницы: 8

Бренд: KEF Страницы: 2

Бренд: EAW Страницы: 2

Бренд: Ideal Security Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды