HP StorageWorks 2405 - Disk System, Руководство пользователя

Страница: 100 / 144

100 Troubleshooting
Interpreting Status Values
SAM and STM report status in common terms, which are defined as follows:
Enclosure ID The unique manufacturer number that
distinguishes the reporting LCC from all other
LCCs.
WW Name (node) The World Wide Name assigned to this disk
system. In normal operation, this value is the same
as the World Wide Name (port) for LCC A.
WW Name (port) The World Wide Name of the reporting LCC.
Firmware Rev. The current firmware version on the reporting
LCC.
Power Supply Status The status of the left (Supply A) and right (Supply
B) power supplies in the selected disk system.
Possible values are OK, critical, not installed, or
not available.
Voltage Sensors
Voltage and Status The voltage detected and status of three voltage
sensors—3.3V, 5.0V, and 12V—on each LCC.
Possible status values are OK, critical, noncritical,
not installed, unknown, and not available.
Temp Sensors
Temperature and Status The temperature detected and status of four
sensors. Possible status values are OK, critical,
noncritical, not installed, unknown, or not
available.
Table 12. Status Indications
Reported
Status
Applicable
Component
Indication
OK All replaceable
components and
sensors Component is installed and no error
conditions are known.