HP StorageWorks 2000i Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 118

HP StorageWorks 2000i Скачать руководство пользователя страница 71

HP StorageWorks 2000 G2 Modular Smart Array Reference Guide

71

• OFFL: The vdisk is offline because it is using offline initialization, or because disks are down and

data may be lost.

• QTCR: The vdisk is in a critical state and has been quarantined because some disks are missing.
• QTOF: The vdisk is offline and has been quarantined because some disks are missing.
• UP: The vdisk is online and does not have fault-tolerant attributes.

•

Current Job. If a utility is running on the vdisk, this field shows the utility's name and progress.

Disk properties

When you select the Disks component, two tables appear. The Disk Sets table shows:

•

Total Space. Total storage space in the vdisk.

•

Type. For RAID 10 or RAID 50, the sub-vdisk that the disk is in; for other RAID levels, the disk's RAID

level; or spare.

•

Disk Type. SAS (dual port), SAS-S (single port), SATA (dual port), or SATA-S (single port).

•

Disks.

•

Size.

The Enclosures Front View table has two tabs. The Tabular tab shows:

•

Health. Shows whether the disk is healthy or has a problem.

OK. The disk is operating normally.
Fault. The disk has failed.
Degraded. The disk's operation is degraded.
Unknown.

•

Name. System-defined disk name using the format Disk-

enclosure-number

.

disk-slot-number

.

•

Type. SAS (dual port), SAS-S (single port), SATA (dual port), or SATA-S (single port).

•

State. Shows how the disk is used:
• AVAIL: Available
• GLOBAL SP: Global spare
• LEFTOVR: Leftover
• VDISK: Used in a vdisk
• VDISK SP: Spare assigned to a vdisk
Also shows any job running on the disk:
• EXPD: The vdisk is being expanded
• INIT: The vdisk is being initialized
• RCON: The vdisk is being reconstructed
• VRFY: The vdisk is being verified
• VRSC: The vdisk is being scrubbed

•

Size.

•

Enclosure. Enclosure name.

•

Serial Number. Disk serial number.

•

Status. Up (operational) or Not Present.

The Graphical tab shows the locations of the vdisk's disks in system enclosures and each disk’s Health and

State.

«
...
69
70
71
72
73
...
»

Содержание StorageWorks 2000i























































































































Отзывы:

Нет отзывов