HP StorageWorks 2000i Скачать руководство пользователя страница 100

Страница: 100 / 118

100 Event code reference

230

Warning

The snap pool has reached the snap pool

error threshold.
The system will take the action set up in the

policy. Default is to delete the oldest

snapshot.

You can expand the snap pool or delete

snapshots.

231

Critical

The snap pool has reached the snap pool

critical threshold.
The system will take the action set up in the

policy. Default is to delete all snapshots on

the snap pool.

If the policy is to halt writes, then you must

free up space on the snap pool master, or

convert the master volume to a standard

volume in order to resume operations.

232

Warning

The maximum number of enclosures allowed

for the current configuration has been

exceeded.

The platform does not support the number of

enclosures that are configured. The firmware

has removed the enclosure indicated by this

event from its configuration.

233

Warning

The specified disk type is invalid and not

allowed in the current configuration.

One or more disks are not allowed for this

platform. They have been removed from the

configuration. Replace the disallowed disks

with ones that are supported.

234

Critical

The specified snap pool is unrecoverable and

can therefore no longer be used.

All the snapshots associated with this snap

pool are invalid and the user may want to

delete them. However, the data on the

master volume can be recovered by

converting it to a standard volume.

235

Informational A non-disk SCSI device, such as an EMP or

partner controller, has reported a check

condition.

236

Informational A special shutdown operation has started.

237

Informational A firmware update has started and is in

progress.

238

Warning

An attempt to write license data failed due to

an invalid license.

Check the license for what is allowed for the

platform, make corrections as appropriate,

and reinstall. If the license is invalid, the

write will fail.

239

Warning

A timeout has occurred while flushing the

CompactFlash.

Cycle power and restart the system.
If the error persists, save the log files and

contact a service technician.

240

Warning

A failure has occurred while flushing the

CompactFlash.

Cycle power and restart the system.
If the error persists, save the log files and

contact a service technician.

241–

242

Informational CompactFlash status events generated by the

auto-write-through feature whenever an

environmental change occurs. If an

auto-write-through-trigger condition has been

met, write-back cache is disabled.

243

Informational A new RAID enclosure has been detected.

This happens when a controller FRU is moved

from one enclosure to another and the

enclosure detects that the midplane WWN is

different from the WWN it has in its local

flash.

Table 14

Event code descriptions and recommended actions (continued)

Event

code

Event type

Description

Recommended action

Содержание StorageWorks 2000i























































































































Результаты поиска

Содержание StorageWorks 2000i

Отзывы:

HP StorageWorks 2000i, Справочное руководство, Страница: 100 / 118

Результаты поиска

Содержание StorageWorks 2000i

Отзывы: