HP StorageWorks 2000fc - G2 Modular Smart Array Скачать руководство пользователя страница 67

Страница: 67 / 76

HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide

Regulatory compliance and safety

Regulatory compliance

Federal Communications Commission notice

Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio

Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic

devices, including computers, generate RF energy incidental to their intended function and are, therefore,

covered by these rules. These rules place computers and related peripheral devices into two classes, A and

B, depending upon their intended installation. Class A devices are those that may reasonably be expected

to be installed in a business or commercial environment. Class B devices are those that may reasonably be

expected to be installed in a residential environment (i.e., personal computers). The FCC requires devices

in both classes to bear a label indicating the interference potential of the device as well as additional

operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into. Class B devices have an

FCC logo or FCC ID on the label. Class A devices do not have an FCC logo or FCC ID on the label. Once

the class of the device is determined, refer to the following corresponding statement.

Class A equipment

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in which case the user will be required to correct the

interference at personal expense.

Class B equipment

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit that is different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio or television technician for help.

Declaration of conformity for products marked with the FCC logo, United States

only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.
For questions regarding your product, visit

http://www.hp.com

For questions regarding this FCC declaration, contact us by mail or telephone:

•

Hewlett-Packard Company

P.O. Box 692000, Mailstop 510101

Houston, Texas 77269-2000

Содержание StorageWorks 2000fc - G2 Modular Smart Array













































































Результаты поиска

Содержание StorageWorks 2000fc - G2 Modular Smart Array

Отзывы:

Похожие инструкции для StorageWorks 2000fc - G2 Modular Smart Array

Бренды по названию

Популярные бренды

HP StorageWorks 2000fc - G2 Modular Smart Array, Руководство пользователя

Результаты поиска

Содержание StorageWorks 2000fc - G2 Modular Smart Array

Отзывы:

Похожие инструкции для StorageWorks 2000fc - G2 Modular Smart Array

Бренды по названию

Популярные бренды