HP StorageWorks 2000fc - G2 Modular Smart Array Скачать руководство пользователя страница 22

Страница: 22 / 76

Installing the enclosures

Connecting controller and MSA2000 3.5 12-drive enclosures

You can connect up to four MSA2000 3.5 12-drive enclosures to an MSA2312fc and up to three

MSA2000 3.5 12-drive enclosures to an MSA2324fc. The cabling diagrams shown in this section show the

recommended fault-tolerant cabling patterns.

IMPORTANT:

Connecting an MSA2000 3.5 12-drive enclosure to an MSA2312fc or MSA2324fc requires

mini SAS to SAS cables.

IMPORTANT:

Adding a fourth drive enclosure to an MSA2312fc may require a separate, longer cable.

Check the QuickSpecs for an updated list of supported cables. QuickSpecs can be found from your HP

MSA products page at

http://www.hp.com/go/msa

. Select MSA SAN Arrays, and then select your

product. The link for QuickSpecs will be on the right.

IMPORTANT:

The MSA2324fc can also be attached to an MSA70 that is running firmware version 2.18 or

later. For information about the MSA70, see the

HP StorageWorks 70 Modular Smart Array Enclosure user

guide

located on the

MSA2000 Software Support/Documentation CD

shipped with your product or at

http://hp.com/support/manuals

When connecting multiple drive enclosures, use reverse cabling to ensure the highest level of fault

tolerance. Controllers and I/O (expansion) modules are identified by

<enclosure-ID><controller-ID>

. For example,

Figure 3

shows controller 1A connected to I/O

module 2A, and the chain of connections continuing down. Controller 1B is connected to the lower

module (B) of the last drive enclosure in the chain, with connections moving in the opposite direction.

NOTE:

For clarity, the schematic illustrations of the controllers shown in this section show only relevant

details such as expansion ports. For detailed illustrations showing all components, see

Rear panel

components

Figure 1

Cabling connections between a single-controller enclosure and one MSA2000 3.5 12-drive

enclosure

Out

Содержание StorageWorks 2000fc - G2 Modular Smart Array













































































Результаты поиска

Содержание StorageWorks 2000fc - G2 Modular Smart Array

Отзывы:

Похожие инструкции для StorageWorks 2000fc - G2 Modular Smart Array

Бренды по названию

Популярные бренды

HP StorageWorks 2000fc - G2 Modular Smart Array, Руководство пользователя

Результаты поиска

Содержание StorageWorks 2000fc - G2 Modular Smart Array

Отзывы:

Похожие инструкции для StorageWorks 2000fc - G2 Modular Smart Array

Бренды по названию

Популярные бренды