HP StorageWorks 1/16 Tape SuperLoader Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 146

HP StorageWorks 1/16 Tape SuperLoader Скачать руководство пользователя страница 107

Tape Drive Cleaning

93

1/16 Tape SuperLoader Reference Guide

■

If backup software cleaning function is enabled, the software can move the
cleaning tape from the magazine slot to the tape drive and, after the cleaning
cycle, return it to its slot (for more information, see your backup software’s
documentation).

To store the cleaning tape:

1. After you have inserted the tape through the mailslot, on the main menu,

scroll to Configuration.

2. Press Enter.

The Configuration submenu appears.

3. On the submenu, scroll to Cleaning Tape Location.

4. Press Enter.

5. Log in as Administrator.

A map of all the magazine slots appears.

Note:

When a map of the magazine slots appears on the display, an asterisk (*)

indicates a slot occupied by a data cartridge, and an exclamation point (!) indicates a

slot occupied by a cleaning cartridge.

Figure 80: Magazine slot map

6. Scroll to the slot where you want to store the cleaning tape.

Note:

If you store the cleaning tape, you must specify in which slot the tape is to be

stored.

7. Press Enter.

The SuperLoader moves the tape to its new location.

Slot 1

Slot 2*

Slot 3*

Slot 4*

Slot 5

Slot 9

Slot 13*

Slot 6

Slot 10*

Slot 14*

Slot 7*

Slot 11*

Slot 15*

Slot 8*

Slot 12*

Slot 16*

«
...
105
106
107
108
109
...
»

Содержание StorageWorks 1/16 Tape SuperLoader



















































































































































Отзывы:

Нет отзывов