HP Sprout Pro Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 136

background image

Tools and software requirements

To service the computer, you need the following:

●

Torx T-15 screwdriver

●

Flat-bladed screwdriver (may sometimes be used in place of the Torx screwdriver)

●

Phillips #1 screwdriver

●

Diagnostics software

Screws

The screws used in the computer are not interchangeable. They may have standard or metric threads and may
be of different lengths. If an incorrect screw is used during the reassembly process, it can damage the unit. HP
strongly recommends that all screws removed during disassembly be kept with the part that was removed,
then returned to their proper locations.

CAUTION:

Metric screws have a black finish. U.S. screws have a silver finish and are used on hard drives only.

CAUTION:

As each subassembly is removed from the computer, it should be placed away from the work area

to prevent damage.

Cables and connectors

Most cables used throughout the unit are flat, flexible cables. These cables must be handled with care to
avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal from
the connector. Handle cables by the connector whenever possible. In all cases, avoid bending or twisting the
cables, and ensure that the cables are routed in such a way that they cannot be caught or snagged by parts
being removed or replaced.

CAUTION:

When servicing this computer, ensure that cables are placed in their proper location during the

reassembly process. Improper cable placement can damage the computer.

Hard Drives

Handle hard drives as delicate, precision components, avoiding all physical shock and vibration. This applies
to failed drives as well as replacement spares.

●

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging
and label the package “Fragile: Handle With Care.”

●

Do not remove hard drives from the shipping package for storage. Keep hard drives in their protective
packaging until they are actually mounted in the CPU.

●

Avoid dropping drives from any height onto any surface.

●

If you are inserting or removing a hard drive, turn off the computer. Do not remove a hard drive while the
computer is on or in standby mode.

●

Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.

Service considerations

19

«
...
27
28
29
30
31
...
»

Содержание Sprout Pro









































































































































Отзывы:

Нет отзывов

Похожие инструкции для Sprout Pro

ThinkCentre 8104

Бренд: IBM Страницы: 38

Бренд: Sysgration Страницы: 27

FlowControl FC-S01

Бренд: Go!Paint Страницы: 20

Nuvo-6000 Series

Бренд: Neousys Technology Страницы: 100

Бренд: Dell Страницы: 94

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 475

Бренд: Gateway Страницы: 2

Бренд: Gateway Страницы: 98

Бренд: Gateway Страницы: 190

Бренд: IBM Страницы: 52

VAIO VPCCW Series

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

VAIO VPCCW Series

Бренд: Sony Страницы: 24

Бренд: Sony Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды