3.
Remove the Phillips PM screws securing each half of the front speaker
(2)
.
4.
Remove the speaker cables
(3)
that are routed on each side of the front area.
5.
Remove the speakers
(4)
.
Reverse this procedure to install the front speakers.
Before removing the rear speaker, follow these steps;
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure on page 27
).
5.
Disconnect the battery cable (see
Battery on page 29
).
6.
Remove the system board (see
System board on page 37
).
NOTE:
The heat sink overlaps the rear speakers so the system board must be removed before
the rear speakers.
Remove the rear speakers
1.
Disconnect the rear speaker cable from the USB/Audio board
(1)
.
42
Chapter 4 Removal and replacement procedures
Содержание Spectre
