Heat sink
Description
Spare part number
Heat sink
689938-001
NOTE:
To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side
of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a
temperature sensor and is designed to turn on automatically when high temperature conditions exist.
These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure on page 27
).
5.
Disconnect the battery cable (see
Battery on page 29
),
6.
Remove the system board (see
System board on page 37
).
Remove the heat sink:
1.
From the system board, remove the 4 Phillips PM screws securing the heat sink
(1)
to the
system board.
CAUTION:
These screws must be removed in the sequence that is marked on the heat sink so
that the correct pressure is applied to the processor and other components.
40
Chapter 4 Removal and replacement procedures
Содержание Spectre
