HP S5820V2 Series, Справочник по командам

Страница: 24 / 28

17
and the traffic from the VM cannot be forwarded. When you change pre-association to association
for a VSI, the EVB bridge sets the VM's MAC address.
•
After creating a VSI, you can enter VSI view by executing the interface s-channel command.
Examples
# Create a VSI on S-channel 1/0/1:10, with VSI local ID 1 and association property.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname-S-Channel1/0/1:10] evb vsi 1 association
Related commands
• evb s-channel
•
evb vsi filter
•
interface s-channel
evb vsi active
Use evb vsi active to activate a VSI.
Use undo evb vsi active to deactivate a VSI.
Syntax
evb vsi active
undo evb vsi active
Default
No VSI is activated.
Views
VSI view
Predefined user roles
network-admin
Usage guidelines
Configurations such as traffic monitoring on a VSI take effect only after the VSI is activated. When a VSI
is not activated, do not make any configurations other than filters on the VSI. For more information about
traffic monitoring, see ACL and QoS Configuration Guide .
Activate a VSI after configuring a VSI filter, and deactivate a VSI before removing a VSI filter.
Examples
# Activate S-channel 1/0/1:10.1.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1] evb vsi active
Related commands
evb vsi filter