10
Syntax
evb default-manager
{ {
ip
ip-address
|
ipv6
ipv6-address
|
name
name
} [
port
port-number
] |
local-server
}
undo evb default-manager
Default
The default VSI manager is not specified.
Views
System view
Predefined user roles
network-admin
Parameters
ip
ip-address
: Specifies the IPv4 address of the default VSI manager.
ipv6
ipv6-address
: Specifies the IPv6 address of the default VSI manager.
name
name
: Specifies the name of the default VSI manager, a case-insensitive string of 1 to 255
characters.
port
port-number
: Specifies the port number of the default VSI manager, in the range of 0 to 65535. The
default port number is 8080.
local-server
: Specifies the device as the default VSI manager.
Usage guidelines
When the bridge receives a VDP packet other than a De-Associate packet from a station, it contacts the
VSI manager specified in the VDP packet to get VSI resources and policies for the station.
The VSI manager ID TLV in a VDP packet carries the VSI manager's IP address. If the value for the TLV is
all-zero, the bridge communicates with the default VSI manager specified by this command.
Examples
# Set the IPv4 address of the default VSI manager to
192.168.100.20
.
<Sysname> system-view
[Sysname] evb default-manager ip 192.168.100.20
evb enable
Use
evb enable
to enable EVB on a port.
Use
undo evb enabl
e to disable EVB on a port.
Syntax
evb enable
undo evb enable
Default
EVB is disabled on a port.
Views
Ethernet interface view
Содержание S5820V2 Series
Страница 6: ...We appreciate your comments ...
