16
VDP resource-wait-delay exponent Calculated value (seconds)
Result value (seconds)
26 671.08864
672
27 1342.17728
1343
28 2684.35456
2685
29 5368.70912
5369
30 10737.41824
10738
31 21474.83648
21475
Examples
# Configure the VDP resource-wait-delay exponent for Ten-GigabitEthernet 1/0/1 as
23
.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] evb vdp timer resource-wait-delay exponent 23
evb vsi
Use
evb vsi
to create a VSI.
Use
undo evb vsi
to remove a VSI.
Syntax
evb vsi
vsi-local-id
{
association
|
pre-association
}
undo evb vsi
vsi-local-id
Default
No VSI exists on an S-channel.
Views
S-channel interface view
Predefined user roles
network-admin
Parameters
vsi-local-id
: Specifies a VSI local ID in the range of 0 to 1023.
association
: Specifies the association property. On a VSI with the association property, all filters
immediately take effect.
pre-association
: Specifies the pre-association property. On a VSI with the pre-association property,
VLAN filters take effect, but <VLAN, MAC> filters are not effective.
Usage guidelines
•
A VSI is usually created or deleted by a VSI manager. You can also manually create or delete a VSI,
or modify its pre-association or association property by executing this command.
•
A VSI is a subinterface of an S-channel interface. Removing an S-channel also removes all its VSIs.
•
When you change
association
to
pre-association
for a VSI, if MAC address information is
contained in the traffic sent by a VM, the MAC address is removed from the drive on the EVB bridge,
Содержание S5820V2 Series
Страница 6: ...We appreciate your comments ...
