HP PS1810 SERIES Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 100

background image

iii

Preface

Preface

About This Document

The HP PS1810 series switches are purpose built layer 2 web-managed switches, specially designed to
work with HP ProLiant Gen8 servers. The HP PS1810 series switches provide reliable, plug-and-play
Gigabit network connectivity, consolidated management features, network security capabilities,
enhancements to ease of use, improved energy efficiency, and expanded deployment flexibility. The
HP PS1810 series switches are ideal for deployment with HP ProLiant Gen8 servers.

The HP PS1810 series switches can be managed in-band from a remote network station using a web
GUI, and its configuration may also be viewed using an SNMP based management application. This
guide describes how to configure and view the software features using the Web-based graphical user
interface (GUI).

Audience

The information in this guide is primarily intended for System administrators and Support providers
who are responsible for configuring, operating, or supporting a network using HP PS1810 series switch
software. An understanding of the software specifications for the networking device platform, and a
basic knowledge of Ethernet and networking concepts, are presumed.

About Your Switch Manual Set

The switch manual set includes the following:

■

Quick Setup Guide

- a printed guide shipped with your switch. Provides illustrations for basic

installation and setup guidelines.

■

Regulatory and Safety Information

- printed documentation shipped with your switch.

Includes Regulatory statements and standards supported by the switch, along with product
specifications.

■

Installation and Getting Started Guide

- (HP Web site only). Provides detailed installation

guide for your switch, including physical installation on your network, basic troubleshooting,
product specifications, supported accessories, Regulatory and Safety information.

■

Management and Configuration Guide

- This guide describes how to manage and configure

switch features using a Web browser interface.

■

Release Notes

- (HP Web site only). Provides information on software updates. The Release

Notes describe new features, fixes, and enhancements that become available between
software revisions.

«
...
3
4
5
6
7
...
»

Содержание PS1810 SERIES





































































































Отзывы:

Нет отзывов

Похожие инструкции для PS1810 SERIES

Бренд: JB Systems Страницы: 24

Бренд: JB Systems Страницы: 61

Бренд: LogLogic Страницы: 30

Бренд: Mercusys Страницы: 35

Бренд: IBM Страницы: 72

Бренд: Keysight Technologies Страницы: 106

Network Adapter ADZIFCF

Бренд: Addonics Technologies Страницы: 1

Бренд: Juniper Страницы: 396

Бренд: Altimium Страницы: 12

Security Router X-PeditionTM

Бренд: Enterasys Страницы: 466

Бренд: Transition Networks Страницы: 5

Бренд: Lanpro Страницы: 3

Бренд: Belkin Страницы: 42

Бренд: Linksys Страницы: 44

Бренд: C&H Technologies Страницы: 1

Бренд: Adeunis RF Страницы: 68

Бренд: Infrapower Страницы: 36

TEW-635BRM - Wireless Router

Бренд: TRENDnet Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды