HP ProLiant SL250s Gen8 Скачать руководство пользователя страница 23

Страница: 23 / 88

Removal and replacement procedures 23

This symbol on an RJ-45 receptacle indicates a network interface connection.

WARNING:

To reduce the risk of electric shock, fire, or damage to the equipment, do

not plug telephone or telecommunications connectors into this receptacle.

This symbol indicates the presence of a hot surface or hot component. If this surface is

contacted, the potential for injury exists.

WARNING:

To reduce the risk of injury from a hot component, allow the surface to cool

before touching.

This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.

WARNING:

To reduce the risk of personal injury or damage to the equipment, observe

local occupational health and safety requirements and guidelines for manual material
handling.

These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.

WARNING:

To reduce the risk of injury from electric shock, remove all power cords to

completely disconnect power from the system.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING:

To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

•

Unplug the power cord from the power supply to disconnect power to the equipment.

•

Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

Preparation procedures

To access some components and perform certain service procedures, you must perform one or more of the
following procedures:

•

Power down the server (on page

If you must remove a server from a rack or a non-hot-plug component from a server, then you must power
down the server.

Содержание ProLiant SL250s Gen8

























































































Результаты поиска

Содержание ProLiant SL250s Gen8

Отзывы:

Похожие инструкции для ProLiant SL250s Gen8

Бренды по названию

Популярные бренды

HP ProLiant SL250s Gen8, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant SL250s Gen8

Отзывы:

Похожие инструкции для ProLiant SL250s Gen8

Бренды по названию

Популярные бренды