HP ProLiant DL580 Gen9 Скачать руководство пользователя | Manualshive

Страница: 76 / 108

background image

Diagnostic tools 76

Warning: The Product ID should ONLY be modified by qualified service

personnel. This value should always match the Product ID located on the

chassis.

7.

Enter the product ID and press the

Enter

key.

8.

Press the

F10

key to confirm exiting System Utilities. The server automatically reboots.

HPE ProLiant Pre-boot Health Summary

If the server will not start up, you can use iLO to display diagnostic information on an external monitor.

This feature is supported on servers that support external video and have a UID button or an SUV

connector. When power is available to the server but the server is not powered on, iLO runs on auxiliary

power and can take control of the server video adapter to display the HPE ProLiant Pre-boot Health

Summary.
For additional information, see the following documents:

•

iLO 4 User Guide

— See the Hewlett Packard Enterprise website

http://www.hpe.com/info/ilo/docs

•

ProLiant Gen9 Troubleshooting Guide, Volume I: Troubleshooting —

See "Troubleshooting

Resources (on page

HPE Insight Diagnostics

The Insight Diagnostics is a proactive server management tool, available in both offline and online

versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify

server installations, troubleshoot problems, and perform repair validation.
The Insight Diagnostics Offline Edition performs various in-depth system and component testing while the

OS is not running. To run this utility, boot the server using Intelligent Provisioning.
The Insight Diagnostics Online Edition is a web-based application that captures system configuration and

other related data needed for effective server management. Available in Microsoft Windows and Linux

versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the Hewlett Packard Enterprise website

http://www.hpe.com/info/InsightDiagnostics

). The Insight Diagnostics Online Edition is also available

in the SPP.

HPE Insight Diagnostics survey functionality

HPE Insight Diagnostics (on page

) provides survey functionality that gathers critical hardware and

software information on ProLiant servers.
This functionality supports operating systems that are supported by the server. For operating systems

supported by the server, see the Hewlett Packard Enterprise website

http://www.hpe.com/info/supportos

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted Insight Diagnostics

installation, or it can be installed through the SPP.

Active Health System

The HPE Active Health System provides the following features:

•

Combined diagnostics tools/scanners

«
...
74
75
76
77
78
...
»

Содержание ProLiant DL580 Gen9













































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL580 Gen9

Univerge SV8100

Бренд: NEC Страницы: 78

Univerge SV8100

Бренд: NEC Страницы: 186

Univerge SV8100

Бренд: NEC Страницы: 150

Univerge SV8100

Бренд: NEC Страницы: 52

Бренд: IBM Страницы: 180

Бренд: Buffalo Страницы: 2

Бренд: Exsys Страницы: 24

FusionServer G8600 V7

Бренд: xFusion Digital Technologies Страницы: 112

Бренд: StarTech.com Страницы: 24

xSeries 342 2RX

Бренд: IBM Страницы: 158

Бренд: Kraun Страницы: 36

Compaq AlphaServer DS10

Бренд: HP Страницы: 43

Cluster Platform Hardware Kits v2010

Бренд: HP Страницы: 12

Бренд: HP Страницы: 12

hpe proliant dl20 gen9

Бренд: HP Страницы: 131

Cisco MDS 8/12c

Бренд: HP Страницы: 44

Cluster Platform

Бренд: HP Страницы: 74

Cisco MDS 8/24c

Бренд: HP Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды