HP ProLiant DL580 Gen9, Руководство по техническому обслуживанию и ремонту

Страница: 57 / 108

Removal and replacement procedures 57
2.
Install the heatsink.
3.
Install the processor memory drawer cover.
4.
Install the processor memory drawer.
5.
Connect each power cord to the server.
6.
Connect each power cord to the power source.
7.
Power up the server.
Processor
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
CAUTION: To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
IMPORTANT: Processor socket 1 must be populated at all times or the server does not
function.
To remove the processor:
1.
Power down the server (on page 26 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend the server from the rack (on page 26 ).
4.
Remove the processor memory drawer (on page 29 ).