System Setup and Configuration for Novell NetWare 6
Creating Novell Storage Services Volumes and Pools
To create NSS volumes and pools:
1.
Log in to ConsoleOne from one of the nodes and authenticate to the
appropriate tree.
2.
Scroll down and highlight the cluster created earlier.
3.
Select the
Device Disk Management
icon near the top of the screen.
4.
Highlight a shared drive. (Be sure that it is not the drive containing DOS or
SYS.)
5.
Select the
Media
tab and click
NSS logical volumes.
6.
Select
New
and enter a new logical volume name. Click
Next.
7.
Highlight the first external shared drive on the Smart Array Cluster Storage
system.
8.
Select
Allow volume quota to
grow.
Click
Next.
9.
Enter a Pool Name and click
OK.
10.
Assign a virtual IP address for the NSS volume. Click
OK.
11.
Select
Finish.
NOTE:
When prompted to continue creating the partition, click
Yes.
12.
Repeat steps 6 through 11 for all shared drives.
NOTE:
At this point, all of the NSS Volumes that were created will be online in the
cluster.
Configuration is now complete.
6-6
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL
Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 3:00 PM
