System Setup and Configuration for Microsoft NT Server 4.0, Enterprise Edition
7.
Select
Start, Programs, System Tools, Disk Administrator.
Review the drive
letters and change if necessary to be the same as the first server.
8.
Shut down the second server.
Configuring Cluster Server
To complete the packaged cluster configuration:
1.
Power on the first server.
2.
Install and configure Microsoft Cluster Server (MSCS).
NOTE:
Refer to the Microsoft Windows NT Server 4.0, Enterprise Edition documentation
for details on installing and configuring MSCS.
3.
Install Service Pack 6a or later and reboot the server when prompted.
4.
Rerun the ProLiant Support Pack for Microsoft Windows NT 4.0 EE to ensure
that the latest HP drivers were not overwritten by the service pack. Reboot if
prompted.
5.
Power on the second server and repeat steps 2 through 4 after the first server is
complete.
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
4-5
HP CONFIDENTIAL
Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 2:08 PM
