System Setup and Configuration for Microsoft NT Server 4.0, Enterprise Edition
For more information on the automatic configuration, refer to the
HP
ROM-Based Setup Utility User Guide
located on the Documentation CD.
3.
Insert the SmartStart CD into the CD-ROM drive and reboot the server. Follow
the on-screen instructions to install the operating system.
IMPORTANT:
Using the information gathered earlier, configure the TCP/IP settings for
the public and private network adapters during the operating system installation.
For more information on installing the operating system, refer to the SmartStart
installation poster included in the ProLiant Essentials Foundation Pack or to the
operating system documentation.
4.
After the operating system installation is complete, shut down the server.
5.
Repeat steps 2 through 4 for the second server.
Configuring the Shared Storage
To configure the shared storage:
1.
Power on the first server.
2.
Select
Start, Programs, System Tools, Array Configuration Utility
from the
desktop of the server.
3.
Select the
Smart Array Cluster Controller
to configure the shared storage hard
drives. Refer to the
HP
Array Configuration Utility User Guide
on the
Documentation CD for detailed information.
NOTE:
Microsoft recommends creating a 500-MB quorum drive to store cluster
information. The quorum drive may be a logical drive that is part of an array.
4.
Select
Start, Programs, System Tools, Disk Administrator
to create volumes
out of the logical drives after the storage system drives are configured. Be sure to
assign drive letters and format the volumes for NT File System (NTFS).
5.
Close
Disk Administrator
and shut down the first server.
6.
Power on the second server.
4-4
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL
Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 2:08 PM
