HP ProLiant DL360 Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 107 / 112

CAUTION:
This equipment is designed to permit the connection of the earthed conductor of the DC supply circuit to
the earthing conductor at the equipment.
If this connection is made, all of the following must be met:
• This equipment must be connected directly to the DC supply system earthing electrode conductor or
to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing
electrode conductor is connected.
• This equipment must be located in the same immediate area (such as adjacent cabinets) as any
other equipment that has a connection between the earthed conductor of the same DC supply circuit
and the earthing conductor, and also the point of earthing of the DC system. The DC system must be
earthed elsewhere.
• The DC supply source is to be located within the same premises as the equipment.
• Switching or disconnecting devices must not be in the earthed circuit conductor between the DC
source and the point of connection of the earthing electrode conductor.
HPE 1600W Flex Slot Platinum Hot Plug Power Supply
Specification Value
Input requirements
Rated input voltage
200 to 240 VAC
240 VDC (China only)
Rated input frequency 50 Hz to 60 Hz
Rated input current
8.7 A at 200 VAC
7.2 A at 240 VAC
Maximum rated input power
1734 W at 200 VAC
1720 W at 240 VAC
BTUs per hour
5918 at 200 VAC
5884 at 240 VAC
Power supply output
Rated steady-state power
1600 W at 200 VAC to 240 VAC input
1600 W at 240 VDC input
Maximum peak power
2200 W for 1ms (turbo mode) at 200 VAC to 240 VAC
input
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, see the
Hewlett Packard Enterprise Power Advisor website .
HPE 1600W Flex Slot Platinum Hot Plug Power Supply 107