Operations 21
4.
Remove the server from the rack. For more information, see the documentation that ships with the
rack mounting option.
5.
Place the server on a sturdy, level surface.
Remove the primary access panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
1.
Power down the server (on page
20
).
2.
Remove the server from the rack (on page
20
).
3.
Loosen the captive T-15 Torx thumbscrew securing the access panel to the server.
4.
Slide the access panel toward the rear of the server, then lift it from the server.
Remove the secondary access panel
1.
Power down the server (on page
20
).
2.
Remove the server from the rack (on page
20
).
3.
Remove the primary access panel (on page
21
).
4.
Using a T-10 Torx screwdriver, remove the secondary access panel.
Remove the PCI riser board assembly
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
Содержание ProLiant DL320 Generation 5p
