manualshive.com logo in svg

HP ProLiant DL160se - G6 Server, Руководство пользователя, Страница: 16 / 81

Поделиться
Скачать
HP ProLiant DL160se - G6 Server Скачать руководство пользователя страница 16

 

Software and configuration utilities  16 

Software and configuration utilities 

ROMPaq utility 

The ROMPaq utility enables you to upgrade the system firmware (BIOS) or Lights-Out 100 firmware. To 
upgrade the firmware, insert a ROMPaq diskette into the diskette drive or ROMPaq USB Key into an 

available USB port and boot the system. 
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available 

firmware revisions.  
For more information about the ROMPaq utility, see the HP website (

http://www.hp.com/go/support

). 

 

Lights-Out 100i Remote Management 

The server supports Lights-Out 100i Remote Management functionality. For more information, see the 

server-specific information on the HP website (

http://www.hp.com/servers/proliant

). 

 

HP Insight Diagnostics 

The HP Insight Diagnostics utility displays information about the server hardware and tests the system to 

be sure it is operating properly. The utility has online help and can be accessed using the Insight 

Diagnostics CD or at the HP website (

http://www.hp.com/support

). 

 

Drivers 

HP drivers and utilities can be found on the Support CD. For the latest drivers and information on 

supported operating systems, refer to the HP website (

http://www.hp.com/support

). 

  

 

IMPORTANT:

  Always perform a backup before installing or updating device drivers. 

  

 

Updating firmware 

To update the server firmware (BIOS or BMC), use the ROMPaq utility (on page 

16

). 

Содержание ProLiant DL160se - G6 Server


















































































Отзывы:

Нет отзывов