manualshive.com logo in svg

HP ProLiant DL160se - G6 Server, Руководство пользователя, Страница: 15 / 81

Поделиться
Скачать
HP ProLiant DL160se - G6 Server Скачать руководство пользователя страница 15

 

Hardware options installation 15 

7.

 

Install the TPM security rivet by pressing the rivet firmly into the system board. 

 

8.

 

Install any components removed to access the TPM connector. 

9.

 

Install the access panel. 

10.

 

Install the server into the rack ("

Installing the server into the rack

" on page 

10

). 

11.

 

Power up the server (on page 

5

). 

 

Retaining the recovery key/password 

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after 
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery 

key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of 

system integrity. 
To help ensure maximum security, observe the following guidelines when retaining the recovery 
key/password: 

•

 

Always store the recovery key/password in multiple locations. 

•

 

Always store copies of the recovery key/password away from the server. 

•

 

Do not save the recovery key/password on the encrypted hard drive. 

 

Enabling the Trusted Platform Module 

Press the F10 key to access BIOS Setup. See the BIOS setup information for the specific procedure to 

enable the TPM on a ProLiant 100 Series server. 

  

 

CAUTION: 

 When a TPM is installed and enabled on the server, data access is locked if you 

fail to follow the proper procedures for updating the system or option firmware, replacing the 

system board, replacing a hard drive, or modifying OS application TPM settings. 

  

For more information on firmware updates and hardware procedures, see the 

HP Trusted Platform Module 

Best Practices White Paper

 on the HP website (

http://www.hp.com/support

).  

For more information on adjusting TPM usage in BitLocker™, see the Microsoft website 

(

http://technet.microsoft.com/en-us/windowsvista/aa905065.aspx

). 

Содержание ProLiant DL160se - G6 Server


















































































Отзывы:

Нет отзывов