manualshive.com logo in svg

HP ProLiant DL160se - G6 Server, Руководство пользователя, Страница: 13 / 81

Поделиться
Скачать
HP ProLiant DL160se - G6 Server Скачать руководство пользователя страница 13

 

Hardware options installation 13 

Hard drive options 

For server-specific hard drive installation instructions, refer to the installation sheet included with the 
server. 

 

Hard drive backplane options 

For server-specific hard drive backplane installation instructions, see the installation sheet included with 

the server. 

 

Power supply options 

For server-specific power supply installation instructions, see the installation sheet included with the server. 

 

HP Trusted Platform Module option 

Use these instructions to install and enable a TPM on a supported server. This procedure includes three 
sections: 

1.

 

Installing the Trusted Platform Module board (on page 

14

). 

2.

 

Retaining the recovery key/password (on page 

15

). 

3.

 

Enabling the Trusted Platform Module (on page 

15

). 

TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows® 

BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website 

(

http://www.microsoft.com

). 

  

 

CAUTION: 

 Always observe the guidelines in this document. Failure to follow these guidelines 

can cause hardware damage or halt data access. 

  

When installing or replacing a TPM, observe the following guidelines: 

•

 

Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system 

board. 

•

 

When installing or replacing hardware, HP service providers cannot enable the TPM or the 

encryption technology. For security reasons, only the customer can enable these features. 

•

 

When returning a system board for service replacement, do not remove the TPM from the system 

board. When requested, HP Service provides a TPM with the spare system board. 

•

 

Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security 

rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider 
the system compromised and take appropriate measures to ensure the integrity of the system data. 

•

 

When using BitLocker™, always retain the recovery key/password. The recovery key/password is 
required to enter Recovery Mode after BitLocker™ detects a possible compromise of system integrity. 

•

 

HP is not liable for blocked data access caused by improper TPM use. For operating instructions, see 
the encryption technology feature documentation provided by the operating system. 

 

Содержание ProLiant DL160se - G6 Server


















































































Отзывы:

Нет отзывов