HP ProLiant DL160 Gen8 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 96

background image

Diagnostic tools 70

For more information, see the Management CD or DVD in the HP Insight Foundation suite for ProLiant.

Automatic Server Recovery

ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such as

a blue screen, ABEND (does not apply to HP ProLiant DL980 Servers), or panic. A system fail-safe timer, the

ASR timer, starts when the System Management driver, also known as the Health Driver, is loaded. When the

operating system is functioning properly, the system periodically resets the timer. However, when the
operating system fails, the timer expires and restarts the server.
ASR increases server availability by restarting the server within a specified time after a system hang. At the

same time, the HP SIM console notifies you by sending a message to a designated pager number that ASR

has restarted the system. You can disable ASR from the System Management Homepage or through RBSU.

HP Insight Remote Support software

HP strongly recommends that you install HP Insight Remote Support software to complete the installation or

upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service, or

HP contractual support agreement. HP Insight Remote Support supplements your monitoring 24 x 7 to ensure
maximum system availability by providing intelligent event diagnosis, and automatic, secure submission of

hardware event notifications to HP, which will initiate a fast and accurate resolution, based on your product’s

service level. Notifications may be sent to your authorized HP Channel Partner for on-site service, if

configured and available in your country. The software is available in two variants:

•

HP Insight Remote Support Standard: This software supports server and storage devices and is
optimized for environments with 1–50 servers. Ideal for customers who can benefit from proactive

notification but do not need proactive service delivery and integration with a management platform.

•

HP Insight Remote Support Advanced: This software provides comprehensive remote monitoring and

proactive service support for nearly all HP servers, storage, network, and SAN environments, plus
selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight

Manager. A dedicated server is recommended to host both HP Systems Insight Manager and HP Insight

Remote Support Advanced.

Details for both versions are available on the HP website To download the software, go to Software Depot Select

Insight Remote Support

from the menu on the right.

«
...
68
69
70
71
72
...
»

Содержание ProLiant DL160 Gen8

































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL160 Gen8

Бренд: Mako Страницы: 56

Бренд: NComputing Страницы: 95

Бренд: Wyse Страницы: 6

Бренд: Eaton Страницы: 2

Бренд: TYANO Страницы: 68

Бренд: Interface Masters Страницы: 34

Бренд: TYAN Страницы: 77

Бренд: DNP Страницы: 2

DPR-1260 - RangeBooster G Multifunction Print Server

Бренд: D-Link Страницы: 55

Бренд: D-Link Страницы: 49

Бренд: netAlly Страницы: 2

WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server

Бренд: Linksys Страницы: 76

WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print Server

Бренд: Linksys Страницы: 132

Бренд: Planet Страницы: 68

AirProjector KJ-200

Бренд: TriLink Страницы: 56

cPCI-6510 Series

Бренд: ADLINK Technology Страницы: 112

Бренд: NuPrime Страницы: 26

Бренд: TAG Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды