Processor
Description
Spare part number
Intel Core i7 processor
4770, 3.4 GHz, 8-MB L3 cache, 86W
727373-001
Intel Core i5 processors
4670, 3.4 GHz, 6-MB L3 cache, 86W
727381-001
4570, 3.2 GHz, 6-MB L3 cache, 86W
727380-001
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 37
).
2.
Remove the access panel (
Access panel on page 38
).
3.
Remove the fan sink (
Fan sink on page 70
).
4.
Rotate the locking lever to its full open position
(1)
.
5.
Raise and rotate the microprocessor retainer to its fully open position
(2)
.
6.
Carefully lift the processor from the socket
(3)
.
CAUTION:
Do NOT handle the pins in the processor socket. These pins are very fragile and
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor’s solder connections.
72
Chapter 5 Removal and replacement procedures: Tower (TWR)
Содержание ProDesk 600 G1 Tower
