manualshive.com logo in svg

HP ProDesk 400 G7 SFF, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProDesk 400 G7 SFF Скачать руководство пользователя страница 83

6

Computer Setup (F10) Utility

This information provides details of the Computer Setup Utility.

●

Change settings from the defaults or restore the settings to default values.

●

View the system configuration, including settings for processor, graphics, memory, audio, storage, 
communications, and input devices.

●

Modify the boot order of bootable devices such as hard drives or USB flash media devices.

●

Enter the Asset Tag or property identification number assigned by the company to this computer.

●

Enable the power-on password prompt during system restarts (warm boots) as well as during startup.

●

Establish an administrator password that controls access to the Computer Setup (F10) Utility and the 
settings described in this section.

●

Establish minimum requirements for valid passwords, including length and required types of characters.

●

Secure integrated I/O functionality, including the serial, USB, or audio, or embedded NIC, so that they 
cannot be used until they are unsecured.

●

Enable or disable different types of boot sources.

●

Configure features such as Secure Boot, power management, virtualization support, and language and 
keyboard type used in Setup and POST.

●

Replicate the system setup by saving system configuration information about a USB device and restoring it 
on one or more computers.

●

Enable or disable DriveLock security or securely erase a hard drive (when supported by drive).

Using Computer Setup (F10) Utilities

You can access Computer Setup only by turning the computer on or restarting the system.

To access the Computer Setup Utilities menu, complete these steps:

ENWW

75

Содержание ProDesk 400 G7 SFF









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды