HP ProDesk 400 G7 SFF Скачать руководство пользователя страница 75

Страница: 75 / 136

Cause

Solution

The cable is not securely connected.

Be sure that the cable is securely attached to the network
connector and that the other end of the cable is securely attached
to the correct device.

The cable is attached to the incorrect connector.

Be sure that the cable is attached to the correct connector.

There is a problem with the cable or a device at the other end of the
cable.

Be sure that the cable and device at the other end are operating
correctly.

The network controller is defective.

Contact an authorized service provider.

Diagnostics passes, but the computer does not communicate with the network

Use this information to troubleshoot the computer.

Cause

Solution

Network drivers are not loaded, or driver parameters do not match
current configuration.

Be sure that the network drivers are loaded and that the driver
parameters match the configuration of the network controller. Be
sure that the correct network client and protocol is installed.

The network controller is not configured for this computer.

Select the Network and Sharing Center icon in the Control Panel,
and configure the network controller. To access Control Panel in
Windows 10, type

control panel

in the taskbar search box,

and then select Control Panel from the list of applications.

Network controller stopped working when an expansion board was added to the

computer

Use this information to troubleshoot the computer.

Cause

Solution

The network controller requires drivers.

Verify that the drivers were not accidentally deleted when the
drivers for a new expansion board were installed.

Network controller stops working without apparent cause

Use this information to troubleshoot the computer.

Cause

Solution

The cable is not securely connected.

Be sure that the cable is securely attached to the network
connector, and that the other end of the cable is securely attached
to the correct device.

The network controller is defective.

Contact an authorized service provider.

Cannot connect to network server when attempting remote system installation

Use this information to troubleshoot the computer.

ENWW

Solving network problems

Содержание ProDesk 400 G7 SFF









































































































































Результаты поиска

Содержание ProDesk 400 G7 SFF

Отзывы:

Бренды по названию

Популярные бренды

HP ProDesk 400 G7 SFF, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProDesk 400 G7 SFF

Отзывы:

Бренды по названию

Популярные бренды