manualshive.com logo in svg

HP ProDesk 400 G7 SFF, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProDesk 400 G7 SFF Скачать руководство пользователя страница 101

Table 7-1

  POST numeric codes and text messages (continued)

Control panel message

Description

Recommended action

219-ECC Memory Module Detected ECC 
Modules not supported on this Platform

Recently added memory modules support 
ECC memory error correction.

1.

If additional memory was recently 
added, remove it to see if the problem 
remains.

2.

Check product documentation for 
memory support information.

301-Keyboard Error

Keyboard failure.

1.

Reconnect keyboard with computer 
turned off.

2.

Check connector for bent or missing 
pins.

3.

Be sure that none of the keys are 
depressed.

4.

Replace keyboard.

303-Keyboard Controller Error

I/O board keyboard controller.

1.

Reconnect keyboard with computer 
turned off.

2.

Replace the system board.

304-Keyboard or System Unit Error

Keyboard failure.

1.

Reconnect the keyboard with 
computer turned off.

2.

Be sure that none of the keys are 
depressed.

3.

Replace the keyboard.

4.

Replace the system board.

501-Display Adapter Failure

Graphics display controller.

1.

Clear CMOS.

2.

Verify that the monitor is attached and 
turned on.

510-Flash Screen Image Corrupted

Flash Screen image has errors.

Reflash the system ROM with the latest 
BIOS image.

512-Chassis, Rear Chassis, or Front Chassis 
Fan not Detected

Fan is not connected or might have 
malfunctioned.

1.

Reseat fan.

2.

Reseat fan cable.

3.

Replace fan.

514-CPU or Chassis Fan not Detected

Fan is not connected or might have 
malfunctioned.

1.

Reseat fan.

2.

Reseat fan cable.

3.

Replace fan.

660-Display cache is detected unreliable

Integrated graphics controller display cache 
is not working properly and will be disabled.

Replace system board if minimal graphics 
degrading is an issue.

1720-SMART Hard Drive Detects Imminent 
Failure

Hard drive will soon fail. (Some hard drives 
have a hard drive firmware patch that will fix

 

an erroneous error message.)

1.

Determine if hard drive is giving 
correct error message. Run the Drive 
Protection System test under Using F2 

ENWW

POST numeric codes and text messages

93

Содержание ProDesk 400 G7 SFF









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды