manualshive.com logo in svg

HP ProCurve 530 NA, Руководство по управлению и настройке

Поделиться
Скачать
HP ProCurve 530 NA Скачать руководство пользователя страница 532

D-16

Open Source Licenses

DOCUMENTATION, THE  SPECIFICATIONS. OR OTHERWISE, INCLUDING BUT NOT LIMITED 
TO IMPLIED WARRANTIES OF  MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE AND NON-INFRINGEMENT OF ANY INTELLECTUAL  PROPERTY RIGHTS.

6.

Limitation of Liability.  IN NO EVENT SHALL INMON OR ITS SUPPLIERS OR 

LICENSORS BE  LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT OR 
EXEMPLARY DAMAGES WHATSOEVER, WHETHER RELATED TO OR ARISING OUT OF 
THIS AGREEMENT, THE TRADEMARK, THE SOFTWARE, THE  DOCUMENTATION, THE 
SPECIFICATIONS, OR OTHERWISE, INCLUDING WITHOUT LIMITATION, DAMAGES FOR  
LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA, COSTS OF 
PROCUREMENT OF SUBSTITUTE  GOODS OR SERVICES OR FOR ANY CLAIM OR 
DEMAND AGAINST LICENSEE BY ANY OTHER PARTY, OR OTHER  PECUNIARY LOSS, 
EVEN IF INMON HAS BEEN ADVISED OF OR KNOWS OF THE POSSIBILITY OF SUCH  
DAMAGES.

7.

Term and Termination.  The term of this Agreement will begin on the Effective Date,  which 

shall be deemed to be the date of delivery of the Software and/or Documentation and/or 
Specifications to Licensee, and shall continue indefinitely unless and until terminated by  
Licensee's giving written notice of termination to InMon, or by InMon pursuant to InMon's  
termination rights as set forth in Section 2.3 above.  Upon any termination of this  Agreement, 
Licensee shall cease exercising its license rights under this Agreement,  including the right to 
distribute Products that incorporate the Software or Documentation  or that implement the 
Specifications.  The rights and obligations contained in Sections 1,  3, 5, 6, 7, and 8 shall survive 
any termination of this Agreement.

8.

General Provisions.

8.1

Assignment.  This Agreement shall be binding upon and inure to the benefit of the  parties 

hereto and their permitted successors and permitted assigns.  InMon will have the  right to assign 
this Agreement without notice to Licensee.  Licensee may assign or transfer (whether by merger, 
operation of law or in any other manner) any of its rights or delegate  any of its obligations 
hereunder without the prior written consent of InMon, provided the  assignee assumes in writing all 
of Licensee's obligations hereunder.

8.2

Notices.  All notices permitted or required under this Agreement shall be in  writing and 

shall be delivered in person or mailed by first class, registered or certified  mail, postage prepaid, 
to the address of the party specified in this Agreement or such  other address as either party may 
specify in writing.  Such notice shall be deemed to have  been given upon receipt.

8.3

Non-Waiver.  No term or provision hereof shall be deemed waived, and no breach  

excused, unless such waiver or consent shall be in writing and signed by the party claimed  to 
have waived or consented.  Any consent or waiver, whether express or implied, shall not  
constitute a consent or waiver of, or excuse for any separate, different or subsequent  breach.

8.4

Independent Contractor.  The parties' relationship shall be solely that of  independent 

contractors, and nothing contained in this Agreement shall be construed to make  either party an 
agent, partner, representative or principal of the other for any purpose.

Содержание ProCurve 530 NA













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды